Strainers installation process is one of the most important procedures one must know and learn while installing a strainer. Before that, it is also necessary to understand the basic facts of the strainer. It is a device through which liquid is allowed to pass for purification from debris and other solid waste materials. It is a very important piping system tool that protects equipment from harm caused by rust, dust, and other objects while passing the liquid. Each strainer must have Isolation Valves at the inlet & outlet of strainers so that the strainer can be taken out of the line & cleaned.
Selecting the right location for strainers installation
Before installing the strainer, selecting the right position for installing the device is very important. The first step you should know before understanding the installation process is selecting the appropriate position for strainer installation. These are a few guidelines required to understand the exact location.
- While selecting the position for installation, it is important to allow enough space to maintain the Strainer + Isolation Valves
- It is important to mount the strainer in the right orientation with the portion angled towards the point of the valve.
- The strainer should be placed in the direction of water flow, which can help get maximum efficiency. Along with this, an indication arrow shall be cast on the valve's body.
Strainers installation process
Most of the strainers manufacturers produce and design Strainers in such a way that it becomes comfortable and easy for the system installer to install the strainer valve. Here are a few basic aspects of the installation process.
- Using an appropriate sealant on the tubes/pipes of the device while assembling strainers.
- Loosening the flanged bolting gradually by moving back and forth in a circular cycle while installing strainers till every lock gets rigid.
- Checking leakage around the connections of pipe.
- In case of any leakage, the installation process can be started over again by depressurizing the system.
These are some of the basic techniques and guidelines you should follow during the process of strainers installation. With the help of the steps mentioned above, you can install a strainer valve successfully.